This is default featured slide 1 title
This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
This is default featured slide 5 title
 

Types Of Connectors

VGA Connector

It’s common in many computers. It’s also used in many videos. For ideal results you should use a 15-pin connector on a device that you are sure of the type of video that it can put in and out. The connector is mostly used in projectors.

Speakon Connector

This is the latest connector used in audio connections. The unit is available in 2, 4 and 8 pole iterations. For audio applications, you should use 2 and 4 pole. The good side with this unit is that it takes in high current signals. When connecting it you should connect the female plugs to the male panel socket. Due to this connection, you should use the connectors in live sound applications where you should use them in connecting power amplifiers to loudspeakers.

XLR Connector

This is another balanced connection that is used in many pro audio applications. The unit has a barrel design that is approximately 2cm in diameter, with about 3-7 pins or holes. You can effectively use it in audio applications where you use the 3 pin XLR.

Balance Jack Connector

It aids in carrying two channels of audio where the tip is the pointy end, the ring is the section after the first black hoop, and the sleeve is after the second black hoop. The tip and ring of the connector carry the left and right channel signals while the sleeve acts as the common earth.